[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: ion generator (fwd)
- To: hvlist <hvlist@xxxxxxxxxxxxxxxxx>
- Subject: Re: ion generator (fwd)
- From: "High Voltage list" <hvlist@xxxxxxxxxx>
- Date: Mon, 21 Nov 2005 11:54:51 -0700 (MST)
- Delivered-to: hvarchiver@pupman.com
- Delivered-to: hvlist@poodle.pupman.com
- Old-return-path: <sroys@poodle.pupman.com>
- Resent-date: Mon, 21 Nov 2005 11:54:51 -0700 (MST)
- Resent-from: hvlist@xxxxxxxxxx
- Resent-message-id: <6ILHcD.A.ANE.7fhgDB@poodle>
- Resent-sender: hvlist-request@xxxxxxxxxx
Original poster: <sroys@xxxxxxxxxxxxxxxxx>
---------- Forwarded message ----------
Date: Thu, 17 Nov 2005 13:48:31 -0800
From: Ed Phillips <evp@xxxxxxxxxxx>
To: High Voltage list <hvlist@xxxxxxxxxx>
Subject: Re: ion generator (fwd)
"
You could try removing the multiplier and putting a low AC voltage (say
6V) on the primary of the transformer and measuring the secondary
voltage (start on the 750VAC range of your multimeter and work down).
This will give you an idea of the turns ratio, which you can multiply by
your line voltage to find out what the normal secondary voltage of the"
transformer would be.
Why not just put line voltage on the secondary and measure the primary voltage? Simpler.
Ed