WinTesla Question

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Harold Weiss" <hweiss-at-new.rr-dot-com> 

Hi All,

I'm trying to resolve why my secondary resonates 15 KHz higher than 
WinTesla predicted.  What I'm wondering about is, are the turns per inch 
for the 97% calibrated for HAPTZ type magnet wire or just standard wire?  I 
have been playing with the turns per inch, where 47.26 tpi for 24 ga, has 
been replaced with 41.10 tpi to get the measured frequency.  This 
represents a turn to turn spacing of .0028", which might account for the 
double build wire thickness.  The only other thing could be toroid hight 
above the secondary.

David E Weiss