Re: Coin Shrinking (was: Of Mice and HV (fwd)) (fwd)

["High Voltage list" <hvlist@xxxxxxxxxx>]

Original poster: Steven Roys <sroys@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Thu, 18 May 2006 09:29:56 -0600
From: Dr. Resonance <resonance@xxxxxxxxxx>
To: High Voltage list <hvlist@xxxxxxxxxx>
Subject: Re: Coin Shrinking (was: Of Mice and HV (fwd)) (fwd)



Hal:

Did you receive the coin crusher schematic I sent you?  If not, forward your 
address and I will send another via the USPS.

DC

Dr. Resonance
----- Original Message ----- 
From: "High Voltage list" <hvlist@xxxxxxxxxx>
To: "hvlist" <hvlist@xxxxxxxxxx>
Sent: Thursday, May 18, 2006 9:00 AM
Subject: RE: Coin Shrinking (was: Of Mice and HV (fwd)) (fwd)


> Original poster: Steven Roys <sroys@xxxxxxxxxx>
>
>
>
> ---------- Forwarded message ----------
> Date: Tue, 9 May 2006 19:43:36 -0700
> From: Brian <brianb@xxxxxxxxxx>
> To: 'High Voltage list' <hvlist@xxxxxxxxxx>
> Subject: RE: Coin Shrinking (was: Of Mice and HV (fwd))
>
> Hal,
>
> You can check out my site and/or Ross Overstreet's but Bert is the king
> of coin shrinking...
>
> http://www.brianb.org/images/Backyard%20Science/Quarter%20Shrinker/pulse
> _discharge.htm
>
> http://www.hot-streamer.com/ross/projects/Pulse/pulse.htm
>
> Regards,
> Brian B.
>
>
>
> -----Original Message-----
> From: High Voltage list [mailto:hvlist@xxxxxxxxxx]
> Sent: Tuesday, May 09, 2006 7:16 AM
> To: hvlist
> Subject: Re: Of Mice and HV (fwd)
>
> Original poster: Steven Roys <sroys@xxxxxxxxxx>
>
>
>
> ---------- Forwarded message ----------
> Date: Mon, 8 May 2006 09:08:34 -0700
> From: Krohns <2halice@xxxxxxx>
> To: High Voltage list <hvlist@xxxxxxxxxx>
> Subject: Re: Of Mice and HV (fwd)
>
> Hello,
>
> I'm new to this list.
>
> D.C. Cox has told me about the coin crusher setup.  Would anyone be
> willing
> to share a schematic and construction details?.... or an address where
> they
> can be found on the web?  Thanks in advance.
>
> Hal in Tucson
>
> [A google search on "coin crusher" gives a few sites.  Bert Hickman's
> site
> is nice - http://www.teslamania.com/ SRR]
>
> ----- Original Message ----- 
> From: "High Voltage list" <hvlist@xxxxxxxxxx>
> To: "hvlist" <hvlist@xxxxxxxxxx>
> Sent: Monday, May 08, 2006 7:11 AM
> Subject: Re: Of Mice and HV (fwd)
>
>
>> Original poster: Steven Roys <sroys@xxxxxxxxxx>
>>
>>
>>
>> ---------- Forwarded message ----------
>> Date: Wed, 03 May 2006 15:58:35 -0700
>> From: Ed Phillips <evp@xxxxxxxxxxx>
>> To: High Voltage list <hvlist@xxxxxxxxxx>
>> Subject: Re: Of Mice and HV (fwd)
>>
>> I designed a similar type of setup we called the "Coon Cannon".
>>
>> Take a 6" piece of PVC pipe about 2' long. Cap one end. Mount of pair
> of
>> Carriage bolts about 6" from the capped end with the Heads inside the
> pipe.
>> Connect these to a large cap (like one of our 300lbs coin crusher
> caps).
>> Place bait in the end-cap, and setup your charging system.
>>
>> Raccoon/Opossum/Skunk/Rat, etc wanders in the pipe, gets to the foot,
> and
>> closes the circuit.
>>
>> *FOOMP*
>>
>> Trap is self cleaning and self resetting.
>>
>>
>> Chris Boden"
>>
>>
>> You must have pretty small critters where you are!  I don't think many
> of
> our grown coons, possums, or skunks would go into a hole that small that
> they hadn't dug themselves.  As for self-cleaning, based on lots of
> experience I wouldn't bet on it!!
>>
>> Ed
>>
>>
>>
>
>
>
>
>
>
>
>
>