Stuff from Bill Wysock for sale
From: Chip Atkinson [SMTP:chip-at-pupman-dot-com]
Sent: Monday, January 26, 1998 2:57 PM
Subject: Stuff from Bill Wysock for sale
Here's something from Bill Wysock. Please contact him, not me. All
formatting errors are my fault (sorry).
TESLA TECHNOLOGY RESEARCH
2527 Treelane Ave.
Monrovia, CA 91016-4951
TESLA COIL COMPONENTS CLEARANCE SALE
Amertran Plate Transformer: 120 volt primary, 17,600 volt secondary, single phase,
rated 10.6 Kva. Approx. 560 lbs., with 18 gal. oil. This is a
transformer that was originally built for Navy shipboard service.
The footprint is approx. 20" wide X 18" deep X 38" high. There are
4 porcelain feed-thru terminal that are top-mounted. The high
voltage bushings are terminated with a 1.5" dia. adjustable sphere
safety gap. The primary winding is bi-filar and can easily be
series connected for 240 volt input. These transformers are built
like "The Rock of Gilbalter" and the core does saturate even up to
20 Kva input. The oil in these transformers has not been tested for
p.c.b. content. Five units available. $675.00 ea. plus shipping.
2) Hill Transformer Co. pole pig, as new. 120/240 volt primary, 12,000
single phase, 50 Kva. Approx. 600 lbs., with 20 gal. oil,
non-p.c.b. This transformer
is mounted on a wooden swivel castor base approx. 30" dia. X
60" high overall, and has external side-mounted cooling tubes.
This is a new unit that was never placed in commercial service.
One unit available. $750.00, plus shipping.
Hill Transformer Co. pole pig, as new. 120/240 volt primary, 12,000
single phase, 75 Kva. Approx. 750 lbs., with 30 gal. oil,
non-p.c.b. This transformer is mounted on a heavy-duty wooden
base with aircraft quality heavy-duty swivel castors. The base
is 30" dia. X 68" high overall, and has external side-mounted
cooling tubes. This transformer has been given a custom paint
job and looks museum quality. This unit is as new, having never
been placed in commercial service. One unit available. $850.00,
plus shipping. See "miscellaneous components" on web page.
General Electric Co. pole pig, as new. 120/240 volt primary, 12,000
single phase, 50 Kva. Approx. 665 lbs., with 20 gal. oil,
non-p.c.b. This transformer has a new coat of paint and is
approx. 20" dia. X 50" high overall. One unit available. $650.00,
Amertran Plate Choke (Retard Coil.) 15,000 volt DC, 0.020 amps -at- 900
Henrys, amps -at- 25 Henrys. 6 gal. oil (not checked for p.c.b.) Approx. 20"
wide X 16" deep X 24" high overall, with two porcelain feed-thru
top-mounted bushings with 1.5" dia. adjustable sphere gap. Approx. 150
lbs. 4 units available. $150.00 ea. plus shipping.
Westinghouse Potential Transformer, oil filled unit with top-mounted
as new. 120:1 ratio, 14,400 volt/120 volt, 1,500 va., as new,
one unit available, approx. 100 lbs. $295.00, plus shipping.
General Electric Potential Transformer, oil filled unit with top-mounted
terminals, as new. Dual ratio 100:1 or 150:1, 11,000/16,500 volt
secondary, 120 volt primary, rated 400 va., but does not saturate
up to 1,200 va. One unit available, approx. 100 lbs. $275.00,
8) Sangamo/Weston Potential Transformer, dry type, as new, 60:1 ratio,
secondary, 120 volt primary, 1,200 va. 2 units available.
$185.00 ea. plus
15,000 volt 60 ma. 900 va. (new). 4 units avail. $120.00 ea. plus shpg.
12,000 volt 120 ma. 1,375 va. (as new) 1 unit avail. $150.00 plus shpg.
15,000 volt 60 ma. 495 va. (used). 1 unit avail. $75.00 plus shpg.
5,000 volt 120 ma. 330 va. (used) 1 unit avail. $80.00 plus shpg.
12,000 volt 60 ma. 400 va. (used) 3 units avail. $70.00 ea. plus shpg.
9,000 volt 60 ma. 300 va. (used) 4 units avail. $60.00 ea. plus shpg.
12,000 volt 60 ma. 720 va. (new) 3 units avail. $95.00 ea. plus shpg.
9,000 volt 60 ma. 300 va. (new) 2 units avail. $80.00 ea. plus shpg.
9,000 volt 120 ma. 600 va. (used) 3 units avail.. $100.00 ea. plus shpg.
General Electric High Voltage Laboratory Testing Transformer.
This transformer was originally used as a power source for the
Model 13M Magnifier Tesla Coil. It is mounted on a heavy duty 36"
dia. circular base with 4 aircraft quality swivel castors and stands
approx. 70" high overall. It weighs approximately 1,700 lbs. It is
rated at 25 Kva, but has been successfully used in tests up to 35
Kva. It has six input tap positions for voltages up to 500, which
corresponds to an output voltage between 40,200 to 75,000 volts.
The output high voltage bushings are approximately 20" high and
are capped with 1.5" X 5" solid aluminum toroids. Images of
this transformer may be seen at www.ttr-dot-com, on the web pages
describing Model 13M. One unit available. Certified non-p.c.b.
$2,000.00, plus shipping.
Raytheon Plate Transformer. Oil insulated, approx. 100 lbs.
Approx. 7,400 volts secondary output at 300 ma. With a 120 volt
primary. One unit available. $120.00, plus shipping.
General Electric pole pig. 12,000 volt secondary, 120/240 volt
primary, 45 Kva, single phase. (used) Certified non-p.c.b.
Approx. 450 lbs. One unit available. $300.00, plus shipping.
X-Ray Transformers. Manufacturer unknown. Tested good. 3 units
available. Output voltages approx. 35,000 to 65,000 volts with
120-240 volt input. These units provide output currents in the
range of 30-150 ma. Not checked for p.c.b. content. Units weigh
approx. 100 lbs. ea. $100.00 ea., plus shipping.
High current filament transformer mfr. By Automatic Winding Co.
Dry type, insulated for 15 KVDC, 120 volt input, 11 volt output -at-
55 amps. Six units available. Approx. 50 lbs. ea. $70.00 ea.,
High current filament transformer mfr. By General Electric.
Dry type. 210-230 volt input, 6-12 volt output -at- 100 amps.
1,200 va. Four units available. Approx. 100 lbs. ea. $85.00 ea.,
High voltage transformer mfr. by Teledyne-Crittenden. Dry type.
120 volt input, 20,000 volt output. 2,000 va. These transformers
are like NST's in that they have built-in current limiting shunts.
They have a dry insulation class of 35 KV. Two units available.
As new. Approx. 120 lbs. ea. $280.00 ea., plus shipping.
High voltage transformer mfr. by General Electric. Dry type.
120/240 volt input, 12,000 volt output. 10 Kva. Dry insulation
class of 35 KV. One unit available. As new. Approx. 280 lbs.
$350.00, plus shipping.
11) ADDITIONAL OFFERINGS.
I have a very large selection of insulators (thousands) from
small Steatite porcelain stand-off types to 48" tall station post
insulators and many high voltage feed-thru bushings. Capacitors
from Cornell-Doublier, Sangamo, Aerovox , Plastic Capacitors, CSI,
and others in oil, mica, polypropyene, and mylar. Hundreds of
meters from Simpson, Weston, G-E, Westinghouse, and others, both
panel mount and switchboard styles. Coil forms in paper-based
and linen-based phenolic and p.v.c. with o.d.'s from 1.5" to 34"
and various lengths to 60". Power contactor relays with coil
ratings from 120-480 volts and current ratings up to 200 amps.
Also available, a large assortment of autotransfomers for General
Radio, Superior Electric, Staco and Ohmite. Binding posts,
connectors, cable, magnet wire, hardware in nylon, brass, copper,
12) SERVICES AVAILABLE.
Tesla Technology Research offers everything from components, to
custom-made sub- assemblies, to turn-key systems. From laboratory
grade to museum quality. Machining services are available.
Technical consulting available. Please e-mail your inquiries or
requests to ttr-at-ocws-dot-com. For an appointment to view any of the
above at Monrovia, California, please call (626) 359-1373 after
3 p.m. PST.
--- If I can't fix it, I can fix it so it can't be fixed --