Re: G10 (cutting a disk)

• To: tesla-at-pupman-dot-com
• Subject: Re: G10 (cutting a disk)
• From: "Jon Rosenstiel" <jonr-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Fri, 28 Apr 2000 21:04:19 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

FWIW..I used a normal metal cutting blade to cut my G10 rotor. Cutting out
one 10" diameter rotor pretty much used up the blade, but it worked.

Jon
> 
> Dr. Resonance, anyone....
> 
> What "special abrasive blade" is required to cut G-10??
> 
> I just received a sheet from McMaster-Carr (1/2"X12"x24") and don't want
> to waste too many bandsaw blades.  Called McM-C and they called the mfgr
> who said to use carbide drills, etc.... but no info on how to cut it.
> 
> Thanx for any ideas,
> 
> Steve - Seattle
> 
> ******************************************

• Prev: RE: Toroid Capacitance calculated without earth-distance?
• Next: MOTs...Exploring the Low End of TC Voltage Part II
• Index(es):
  • Main
  • Thread