[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: RSG rotor mount



Original poster: "Paul Kidwell by way of Terry Fritz <twftesla-at-uswest-dot-net>" <tmb-at-ieee-dot-org>

Go to:

http://www.smallparts-dot-com/

and order a catalog. When it arrives, look up a "TranTorque".

A trantorque is kind of an expanding hub. For a 3/8" shaft,
bore a 3/4" hole through your rotor. Slide the trantorque on
the shaft, slide the rotor onto the trantorque, then tighten
the trantorques nut. Their suppose to lock a rotor to a shaft
better than a woodruff key.

I think that a trantorque for a 3/8" shaft runs about $24US.

Paul