Re: 2 Questions....

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Paul,

I use DigiKey part number 10MH-ND for the bleeder resistors.  10Meg 1/2
watt metal film types from Yageo.

Cheers,

	Terry

At 10:20 PM 7/12/2001 -0400, you wrote:
>Hi Everybody,
>
>I've been searching through the Tesla web ring looking for something I saw a
>few months ago....
>
>Part of the website described a control panel built around a 3 phase variac.
>(one variac was separated from the stack and used for current limiting) The
>noteworthy item about the controller was that the cabinet was scratch built
>from angle iron and sheet metal.
>
>Anybody remember this web page & have a link for it?
>
>Also, I'm about to put in an order to Digikey and I was going to pick up the
>resistors for my MMC. (10 Meg 1/2W) And I was wondering if anybody had a
>suggestion on a part number.
>
>Thanks
>Paul
>
>btw, the number of dead links on the web ring was depressing.
>