[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Failures Specifics



Original poster: "pjj by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jjenkins-at-satx.rr-dot-com>


Used 
Ed Sonderman's tesla excell sheet
 
i continue to play w/ it nightly and will keep tring

 

TC � Primary

                                                

            Inner Diameter             - 8.25�

            Outer Diameter            - 14.5�

            # Turns                        - 7

            Material (Cu Tubing)  - .25�

            Spacing                        - .5� on centers .25� between the
walls

            Calculated Inductance - 19.8 uH

 <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />

TC � Secondary

 

            Diameter                              - 2.5�

            Length of Windings            - 22.25�

            Turns per Inch                     - 36 TPI

            Gauge                                  - 22ga.

            Calculate # of Turns           - 777 turns

            H/D                                      - 1:8.9

            Calculated Inductance        - 4 uH

            Cal. Self Cap.                      - 7.1pF

            Unloaded Res. Freq.            - 939 khz

 

Tank Circuit � 

 

            Cap � 

                        Geek Group Variation 3.5 gallon Bucket 14 Bud-light
bottles

                        Measured Value            - .019 uF

 

            Spark Gap � 

                        Static single gap 

 

            Transformer � 

                        MOT no protection circuit no doubler