[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MMC construction



Original poster: "tesla by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-paradise-dot-net.nz>

Hi
Most advice on the WEB has been to leave a few mm between the bodies to
avoid arcing between the caps
Considering the capital tied up in the MMC might be a good idea to change
it
Best
Ted L in NZ

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, November 20, 2002 4:26 AM
Subject: MMC construction


 > Well I finally got around to putting together my geekgroup cap mmc. Does
 > anyone think I would have problems with arcing between the caps with this
 > setup? I have put together two strings already and I want to make sure
this
 > would be a safe design before doing the other five. The caps are tight to
 > each other.
 >
 > c143b05.jpg
 > Matt Whitman
 > teslacoiler-at-hotmail-dot-com
 > G-2 #1198
 > KC2IEV
 >
 >