Re: New SSTC Design Topology

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "K. C. Herrick by way of Terry Fritz <teslalist-at-qwest-dot-net>" <kchdlh-at-juno-dot-com>

Marc-

Do you have a more exact internet reference to this article?

Ken Herrick

On Wed, 26 Feb 2003 18:05:19 -0700 "Tesla list" <tesla-at-pupman-dot-com>
writes:
 > Original poster: "marc metlicka by way of Terry Fritz
 > <teslalist-at-qwest-dot-net>" <mystuffs-at-orwell-dot-net>
 >
 > Daniel,
 > Last month "power electronics" magazine had a great article about
 > the
 > importance of gate uniformity in multiple gated circuits. It also
 > had
 > shown some example circuit designs to correct and eliminate the
 > problems.
 >
 >   It was a very interesting and informative article and i meant to
 > forward it to terry and all.
 >
 >   since the biggest problem we had on our 600v/12ka scr bridges,
 > supplying drive for the twin 9000 hp motors at the steel mill was
 > the
 > gate control boards gateing each phase slightly off sync, resulting
 > in
 > "phase slamming" loosing six or more blown $900 fuses along with a
 > few
 > "VERY" expensive scr's, we could have used this new technology!
 > Marc M.
 >
 >
 >
 >