Re: Terry Gap vs. TCBOR...

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Ed Phillips <evp-at-pacbell-dot-net> 

Tesla list wrote:
 >
 > Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net>
 >
 > Hi Brett,
 >
 > Now that you got the Fritz gap epoxied (I know, great timing), it would be
 > great to compare the Fritz and TCBOR gaps two ways.
 >
 > 1.  With the total gap spacing the same for each type .
 >
 > 2.  With the gap setting on one set so the breakdown voltage is the same as
 > for the other.   I think this would be the best comparison of performance.
 >
 > I guess I'm thinking that since the geometry is not the same (different
 > diameters),  the breakdown voltage for a given gap setting may not be the
 > same.
 >
 > Gerry R

	How much are on this gap?  They do get awfully hot when running.....

Ed