RE: MOT leakage

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Steve Conner" <steve.conner-at-optosci-dot-com> 

 >Why not interconnect the windings as you have suggested, but leave the
 >transformers intact and separated?

That might well work, but then again they may not share voltage equally, so
one might saturate while the other hardly pulls its weight. Combining the
two cores into one forces the same flux in each set of coils and hence the
same voltage.

With the two separate transformers, connecting the filament windings
together might make them balance better.

Steve C.