[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Calculating capacitance of stacked toroids . . .



Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 



Try using 150% x C1 value --- this works assuming they are the same physical
size.  I have not measured two units together with different sizes.  Perhaps
Ed Wingate could take a measurement with his dual toroid setup.

Dr. Resonance
 >
 > Ctotal = 50% (C1+C2)
 >
 > where:  C1 = capacitance toroid 1
 >             C2 = capacitance toroid 2
 >
 > Dan