[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Need coil winding advice
If you pass along your tel number I will call you from Tucson to advise.
Too much typing.
On Fri, Feb 27, 2009 at 8:57 AM, Jim Harvey (UDN) <
> Greetings... (sorry if duplicate)
> I am designing my first TC and need to build a coil winder. My first
> secondary coil will be:
> Diameter: 4"
> Length: 18 inches
> Wire: 26 AWG
> Since the coil is not too long, I am thinking about a plywood frame
> supporting a motor, turns counter, and arbor. A foot switch would be used
> well as some type of speed control.
> Can anyone point me to some links that show working units?
> 73 & Stay Vertical,
> Jim Harvey (W7YV) - The Great Curmudgeon
> P.O. Box 18009
> Salt Lake City, UT 84118
> <http://www.harveyclan.net/> http://www.harveyclan.net
> <http://www.harveyclan.net/w7yv.htm> http://www.harveyclan.net/w7yv.htm
> FIST # 13337
> SKCC # 3194
> "Calling CQ was like a box of chocolates. You never know what you're gonna
> Tesla mailing list
Tesla mailing list