[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Need coil winding advice

Greetings...   (sorry if duplicate) 
I am designing my first TC and need to build a coil winder. My first
secondary coil will be:
Diameter: 4"
Length: 18 inches
Wire: 26 AWG
Since the coil is not too long, I am thinking about a plywood frame
supporting a motor, turns counter, and arbor. A foot switch would be used as
well as some type of speed control.
Can anyone point me to some links that show working units? 
73 & Stay Vertical,

Jim Harvey (W7YV) - The Great Curmudgeon
P.O. Box 18009
Salt Lake City, UT 84118
 <http://www.harveyclan.net/> http://www.harveyclan.net
 <http://www.harveyclan.net/w7yv.htm> http://www.harveyclan.net/w7yv.htm

FIST # 13337
SKCC # 3194

"Calling CQ was like a box of chocolates. You never know what you're gonna
Tesla mailing list