[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Magnifier topics

Hi Paul

Why the multilayer L2?
>
> Was contemplating a multilayer L2 to reduce losses in coil and increase
Q in same.  I built a resonator similar to this tack with 2 layers and Q was
significantly increased.  Was used on a 600W VTTC used as a CO2
laser driver.  Q (unloaded) was so high, couldn't measure 0.707 V bandpass.

So main motivation is to allow maximum inductance in a compact structure
with higher current handling capability then if wound with a larger wire of
same current carrying capability.  (Larger wire would imply a physically
larger inductor to arrive at same inductance).

--
> Paul Nicholson
> --
>
> Regards
-- 
Dave Sharpe, TCBOR/HEAS
Chesterfield, VA USA

Sharpe's Axiom of Murphy's Law
"Physics trumps opinion!"
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla