Re: [TCML] cores/inductors for resonant charging

[jimlux <jimlux@xxxxxxxxxxxxx>]

On 11/6/19 2:58 AM, Teslalabor wrote:
> Hi Jim,
>
> I built a very cool charging reactor for my DC - System some years ago. 
> It works absolutely perfect, does not require any oil and is bulletproof 
> up to voltages 20kV or even more. I can adjust its inductance in a wide 
> range by simply varying the air gap. For my 12kW DC Teslacoil I set it 
> to 5,5 H, it run there with an primary capacitance of 92nF and break 
> rate up to 400bps. Here are some photos of it, hope is works:
> https://bilderupload.net/bild/mNNg3
> https://bilderupload.net/bild/mNHbV
> https://bilderupload.net/bild/mNV91
> https://bilderupload.net/bild/mNnl7
> https://bilderupload.net/bild/mNwxM
> https://bilderupload.net/bild/mNd0Y
> https://bilderupload.net/bild/mNxBb
> https://bilderupload.net/bild/mNLPr
> https://bilderupload.net/bild/mNSyR

very nifty -
So you broke the winding up into 6 bobbins/spools to distribute the 
voltage stress.  Were they some sort of off the shelf thing?
What's the overall size (forgive me if there was an image with a scale 
in it, I've not looked at them all yet) and the core cross section?
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla