Re: ozone-generators (fwd)

[Steven Roys <sroys@xxxxxxxx>]

---------- Forwarded message ----------
Date: Wed, 14 Apr 2004 20:00:05 -0700 (PDT)
From: Peter Lawrence <Peter.Lawrence@xxxxxxx>
To: hvlist@xxxxxxxxxx
Subject: Re: ozone-generators


OK, I have a bathroom that has a mold problem. I've already removed the
shower tiles and the wallboard exposing the 2x4 wall construction where
the water damage is, I've still got to remove the shower pan and maybe
replace some flooring. Its been airing out for months and the smell of
mold is still there.

I'ld like to ozonate it, but the commercially available units seem way
too expensive.

If I run my fan-blown TC sparc gap in there will I get enough O3 to do
any good, or if I try to rectify my NST output and build "needles" that
will hopefully generate O3 without arcing will that do any good, or ???

(I have a dandy of a fan-blown static gap - four tungsten carbide gaps
in series mounted on ceramic with very fine adjustable gapping, so I'm
really thinking of just putting the TC in the bathroom, close and seal
the door, leave the window open, and "let'er rip" for a while!...)

thanks again,
-Pete Lawrence.