Re: [TCML] high frequency wave propagation along secondary coils

[Frank <fxrays@xxxxxxxxxx>]

Will not need much air movement, besides, low frequency AC sparks are 
not going to be a huge O3 source as compared to a HF arc.
I would be more concerned with vaporized metal from the arc strike 
points and breathing that.
I am sure they will have thought about some form of ventilation to 
keep the person cool and as comfortable as well as to move any toxic gases.

One TC I have had a galvanized discharge point and I could smell the 
zinc and metal every time I ran the coil and changed the point out 
for a SS one.

As a side comment, I would be concerned with the EM field and the 
body's nervous system. I have and can synch'ed my heart rate with a 
strong pulsing magnetic field. The person may have more physiological 
concerns being exposed that long.

Frank

At 04:30 PM 29-09-12 +0200, you wrote:
> A ventilation which is strong enough will blow the sparks away.
>
> ----- Original Message ----- From: "Jim Lux" <jimlux@xxxxxxxxxxxxx>
> To: <tesla@xxxxxxxxxx>
> Sent: Saturday, September 29, 2012 4:10 PM
> Subject: Re: [TCML] high frequency wave propagation along secondary coils
>
>
> > On 9/29/12 2:25 AM, Teslalabor wrote:
> > > ... and what about the ozone he is breathing in for 72hours? I think he
> > > will die from this :)
> >
> > That's solvable with good ventilation..
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla